Cinelink™ - User Guide - Chapter 2 - Activate Cinelink™

Chapter 2 - Activate Cinelink™

Cinelink™ Startup
Power on the Cinelink™ player by pressing the power button on the front of the device.

After a moment, Cinelink™ will display a self-check screen. If any of the items listed do not appear with a green light, please contact Swank Technical Support.

Cinelink™ One-Time Activation
The first time you power on your Cinelink™ player, you will need to activate the device. Press OK on your remote to bring up the on-screen keyboard. Use the arrow and OK keys to input each character of the activation code that was emailed to you. When finished, arrow down to select Send, then press OK.

Please note: The Cinelink™ player will need to have access to the internet during the activation process. By default, Cinelink™ is configured to use DHCP to obtain the correct IP address, gateway
and DNS servers. If you receive a connection error message when attempting to send your activation code, you will need to select the Network Settings button, located at the bottom-right corner of the screen and manually check your settings. This is covered in greater detail in Chapter 5 - Configure Network Settings.

Time Zone
Once you have successfully activated your device, you will be brought to the Initial Settings screen. Here, you must configure your time zone. Using the arrow buttons on the remote, select the Time Zone field and press OK.